Diglett

The upper-left yellow corner retains its rectangular outline, with slight softness visible at the apex against the yellow border.

At the upper-right yellow corner, the apex remains intact with a small amount of edge wear visible along the outer tip.

The lower-left corner is defined but mildly rounded, with the yellow surface layer appearing less uniform at the tip.

The bottom-right yellow corner remains substantially intact, though the point is less sharp than a factory-fresh corner.

The top yellow edge is continuous overall, with scattered pale points and mild surface roughness near the upper border.

The lower yellow edge remains straight but shows intermittent lightening near the corners and along short sections of the perimeter.

The left yellow edge has a mostly clean factory line, with localized pale wear near the lower portion.

The right yellow edge is visually intact across most of its length, with small pale interruptions near the upper and lower ends.

The physical top-left back corner, corresponding to the opposite side of the flipped image, retains a clean blue outline with mild tip softness.

The top-right back corner shows a defined blue point with no obvious material loss along the visible perimeter.

The lower-left back corner maintains a mostly crisp blue edge, with a faintly softened tip under the holder reflection.

The lower-right back corner has a clear blue outline and remains largely pointed, with no visible bend or lift.

The top blue back edge is straight and continuous, with a few subtle light points along the perimeter.

The bottom blue edge remains even, with minor pale interruptions visible near the corner areas.

The physical left back edge appears cleanly cut, though the blue coating shows slight unevenness toward the lower half.

The right blue back edge is largely intact and straight, with a small pale point near the lower corner transition.